| 两侧同时换到之前的修订记录前一修订版后一修订版 | 前一修订版 |
| schoolcdn:gui:xapp [2020/03/16 14:40] – 创建 yangtianquan | schoolcdn:gui:xapp [2020/05/20 20:24] (当前版本) – yangtianquan |
|---|
| ###软件安装 | [[::linux|返回]] |
| | |
| | ` |
| | ####1、xapp安装与配置 |
| ```sh | ```sh |
| sudo /zxedu/bin/libexec/install-x11.py | sudo /zxedu/bin/libexec/install-x11.py |
| sudo /zxedu/bin/libexec/install-facefeature.sh | sudo cp /zxedu/bin/libexec/data/xapp.ini /zxedu/data/config/x11/ |
| | ``` |
| | ####1.1、显示器配置（双屏，单屏跳过） |
| | ```sh |
| | vim /etc/xorg.cong |
| | Section "Monitor" |
| | Identifier "HDMI-1" |
| | Option "PreferredMode" "1600x900" |
| | EndSection |
| | |
| | Section "Screen" |
| | Identifier "HDMI-1" |
| | Monitor "Monitor" |
| | DefaultDepth 24 |
| | Option "TwinView Orientation" "RightOf" |
| | SubSection "Display" |
| | Depth 24 |
| | EndSubSection |
| | EndSection |
| | ``` |
| | |
| | ####1.2、声音配置 |
| | ```sh |
| | aplay -l 得到设备信息(0是声卡编号，7是设备编号）；aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav 测试是否正常运行（耳机音响也可以） |
| | ``` |
| | |
| | ####1.3、alsamixer音量的调节 |
| | ```sh |
| | alsamixer |
| | ``` |
| | ##### 按F6 然后把通道打开如下图所示 |
| | 注意：MM代表关闭 00是代表开启 M切换状态 上下键更改声音大小 |
| | |
| | {{:schoolcdn:howto:150709.png?400 |}} |
| | {{:schoolcdn:howto:0528.png?400 |}} |
| | ```sh |
| | alsactl store && cp /var/lib/alsa/asound.state /zxedu/data/config/x11/backup/ #保存配置 |
| | ``` |
| | ####2、pc校园安全控制台（不能用zx-disk重启，支持chrome浏览器） |
| | ####注意：后台CMDB安全控制台ip地址需设置为127.0.0.1 |
| | ```sh |
| | vim /zxedu/data/config/x11/xapp.ini |
| | enable = true |
| | env = "ALSAPCM=plughw:0,7" ##1.2中aplay -l得到的设备编号 |
| | xinit = "/usr/bin/chromium" "--no-sandbox" "--user-data-dir=/zxedu/data/chromium" "--start-fullscreen" "--window-size=1920,1080" "--app=http://127.0.0.1/webui/#/gate-tunnel" |
| | ``` |
| | ####3、Cdn人脸识别（后台cmdb服务器配置选项里需勾选zxface） |
| | ```sh |
| | vim /zxedu/data/config/x11/xapp.ini |
| | # 1. 修改参数--camera，指定相机 |
| | # 2. 默认在本地进行人脸识别，需要额外安装依赖 |
| | # /zxedu/bin/libexec/install-facefeature.sh |
| | # 3. 可以使用Remote GPU模块 |
| | # 在--zxface_url参数中增加'|feature=http://remote.gpu' |
| | # 4. 海康相机RTSP地址：rtsp://admin:ggmm2016@192.168.0.5/Streaming/Channels/1 |
| | # 5. 必须配置campusng支持zxface，如果本机未安装显卡的话需要配置campusng使用Remote GPU |
| | # 如果不能为campusng配置zxface，可以配置远程人脸比对: |
| | # --zxface_url='|match=http://remote.cdn' --cdn_url='http://remote.cdn' |
| | # 或者: |
| | # --zxface_url='|match=http://remote.cdn|feature=http://remote.gpu' --cdn_url='http://remote.cdn' |
| | #6. 无显卡cdn需启用云端gpu人脸识别 vim /zxedu/data/config/campusng/zxface_remote_url,没有文件新建；添加云端gpu |
| | # 地址http://192.168.1.246(本地） http://cd.nashira.cn:60088（公网），有显卡需要安装large镜像（弃用） |
| | |
| | #7. --zxface_detector=FaceMask启动口罩检测 |
| | env = "LD_LIBRARY_PATH=/usr/local/campusng/lib/lib:/usr/local/cuda/lib64:/usr/local/openvino" "PYTHONPATH=/usr/local/openvino/python3.7:/usr/local/campusng/lib/face:/usr/local/campusng/lib" |
| | xinit = "/usr/bin/env" "python3" "face_recognition_demo.py" "--full_screen" "--face_function=match" "--zxface_url=|match=http://127.0.0.1" "--camera=webcam://0"##调用本身相机或者USB相机 |
| | #xinit = "/usr/bin/env" "python3" "face_recognition_demo.py" "--full_screen" "--face_function=match" "--zxface_url=|match=http://127.0.0.1" "--zxface_detector=FaceMask" "--camera=rtsp://admin:ggmm2016@192.168.1.172/Streaming/Channels/1" ##调用第三方ip相机 |
| | ``` |
| | |
| | |
| | ####4、监控大屏：需要在cmdb首页监控直播中绑定对应的CDN;学校没有监控直播则不启用 |
| | ```sh |
| | vim /zxedu/data/config/x11/xapp.ini |
| | env = "ALSAPCM=plughw:0,7" ##1.2中aplay -l得到的设备编号 |
| | xinit = "/usr/bin/chromium" "--no-sandbox" "--user-data-dir=/zxedu/data/chromium" "--ignore-gpu-blacklist" "--use-gl=desktop" "--start-fullscreen" "--window-size=1920,1080" "--app=http://127.0.0.1/webui/tools/fullscreen_cameras.html#camera_cmdb_id_0,camera_cmdb_id_1" |
| | ``` |
| | |
| | |
| | |
| | ####5、升级镜像后只需执行 |
| | |
| | ```sh |
| | sudo /zxedu/bin/libexec/install-x11.py |
| | sudo /zxedu/bin/libexec/install-facefeature.sh (启用本地人脸识别安装，未启用不用安装） |
| ``` | ``` |
